Product ID:AMBERLITE DP-1 ION EXCHANGE RESIN, 69573
MSDS Date:02/19/1991
FSC:6810
NIIN:01-014-1029
MSDS Number: BYFBJ

ROHM AND HAAS CO

100 INDEPENDENCE MALL WEST
PHILADELPHIA, PA 19106-2399
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 215-592-3000

Cage: 77902

ROHM AND HAAS CO

PHILADELPHIA, PA 19106-2399 US

Telephone: 215-592-2521/215-592-3000

Cage: 77902

CATION EXCHANGE POLYMER; (WEAK ACID CATION EXCHANGE

CAS: 63182-04-7

Fraction By Weight: 30-40%

OSHA PEL N/K

ACGIH TLV: N/K

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 60-70%

OSHA PEL N/K

ACGIH TLV: N/K

USE, AND MAINTENANCE OF EXHAUST SYSTEMS.

RTECS: 9999999ZZ

(ANSI Z87.1 OR APPROVED EQUIVALENT)

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:MATERIAL CAN CAUSE IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES:IMMEDIATELY FLUSH
W/POTABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM
MD . SKIN:FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD .

Extinguishing Media:USE THE FOLLOWING EXTINGUISHING MEDIA WHEN FIGHTING
FIRES INVOLVING THIS MATERIAL;CARBON DIOXIDE, DRY CHEM, WATER
SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:WEAR GLOVES MADE OF COTTON/CANVAS. ADDNL
PERSONAL PROT EQUIP SHOULD INCLUDE SFTY GLASSES (ANSI Z87.1/APPRVD
EQUIV). FLOOR MAY BE SLIPPERY; USE CARE TO AVOID FALLING. TRANSFER
SPILLED MATL TO SUITABLE CNTNRS FOR RECOVERY/DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:MIN REC STOR TEMP IS 0C/32F. MAX REC
STOR TEMP IS 50C/140F. KEEP FROM FREEZING; MATL STAB MAY BE
AFFECTED. MAX REC OPERATING TEMP IS 120C/250F.
Other Precautions:PROPERLY DESIGNED EQUIP IS VITAL IF THESE ION
EXCHANGE RESINS ARE TO BE USED IN CONJUNCTION W/STRONG OXIDIZING
AGENTS SUCH AS NITRIC ACID TO PVNT RAPID BUILD-UP OF PRESS & POSS
EXPLO. CONSULT SOURCE K NOWLEDGEABLE IN HNDLG OF MATLS (SUP DAT)

Respiratory Protection:A NIOSH/MSHA APPROVED RESP PROT PROGRAM MEETING
OSHA 1910.134 & ANSI Z88.2 REQS MUST BE FOLLOWED WHENEVER WORKPLACE
CNDTNS WARRANT RESP'S USE. NONE REQ UNDER NORMAL OPERATING
CONDITIONS.
Ventilation:VENT SYS EMPLOYED IS DEPENDENT ON USER'S SPECIFIC APPLICATN
OF MATL. REFER TO CURRENT EDITION OF "INDUST VENT:A (SUPDAT)
Protective Gloves:GLOVES MADE OF COTTON OR CANVAS.
Eye Protection:SFTY GLASSES (ING 4)
Other Protective Equipment:FACILITIES STORING/UTILIZING MATL SHOULD BE
EQUIPPED WITH AN EYE WASH FACILITY. ANSI APPRVD DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH:7-9.5 (AQUEOUS SLURRY). OTHER PREC:BEFORE PRECEDING. DO NOT PACK
COLUMN W/DRY ION EXCHANGE RESINS. DRY BEADS EXPAND WHEN WETTED;
THIS EXPANSION CAN CAUSE GLASS COLUMNS TO SHATTER. VENT:MANUAL OF
RE C PRACT" PUBLISHED BY AMERICAN CONFERENCE OF GOVERNMENTAL INDUST
HYGIENISTS FOR INFO ON DESIGN, INSTALLATION, (ING 3)

Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
Vapor Pres:17 @ 68F
Vapor Density:0.62
Spec Gravity:1.17 (H*2O=1)
pH:SUPDAT
Evaporation Rate & Reference:<1 (BAC=1)
Appearance and Odor:LIGHT COLORED BEADS, ODORLESS.
Percent Volatiles by Volume:60-70

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS, PARTICULARLY CONCENTRATED
NITRIC ACID.
Stability Condition to Avoid:AVOID TEMPERATURES >200C/392F.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD
ACRYLATE MONOMER AND DIVINYLBENZENE.

Waste Disposal Methods:UNUSED RESIN MAY BE INCINERATED OR LANDFILLED IN
FACILITIES MEETING LOCAL, STATE AND FEDERAL REGULATIONS. FOR
CONTAMINATED RESIN, THE USER MUST DETERMINE THE HAZARD AND USE AN
APPROPRIATE DISPOSAL MET HOD.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.